Sper-scientific 800007 Thermometer 2 Channel Type K/J Uživatelský manuál

Type K/J Thermometers 800004 & 800007

101. The thermometer will automatically turn off after 15 minutes of inactivity.2. Press and hold the HOLD button to disable or enable the auto powe

11Accuracy ±(0.05% of reading + 0.7°C or 1.4°F) when inside the range of 23± 5°C, < 80%RH OR 0.01% of reading + 0.03°C per each °C outside the spec

12OPTIONAL ACCESSORIES800060~97 Type K / J Thermocouple Probes 840090 Water Resistant Instrument Pouch850000 Rubber BootWARRANTYSper Scientic warr

2CONTENTSINTRODUCTION ...2PANEL DESCRIPTION ...3MEASUREMENT PROCEDURES ...4-8OFFSET ADJUSTENT ...

3PANEL DESCRIPTION123456789101. Probe Input (top of unit)2. Display3. °C/°F4. Min/Max5. Type K/J6. REL (relative) / adj7. HOLD / Auto Off 8. Power9. T

4Measurement Mode1. Press the POWER button.2. Press the °C/°F button to select the temperature scale. “°C” or “°F” will appear on the LCD.3. Press

5Note…To obtain the most accurate reading, the probe plug must be the same temperature as the socket. Hold Mode1. Press the HOLD button during mea

61. The max value is updated only when exceeded.2. With the meter on, press the MAX/MIN button once. “MAX” and the maximum (peak) temperature app

7Relative Measurement1. Press the REL button during measurement to store the current temperature into memory. “REL” and “0.0°” appear on the LCD.2.

8T1-T2 Δ Mode (800007 Only)Using two probes, model 800007 will display the Δ (difference) between the T1 and T2 temperatures. The MAX/MIN and REL but

9You can adjust the offset to compensate for meter and probe error.1. Press and hold REL to enter offset setup mode.2. Press TYPE or POWER to inc