Sper-scientific 850021 Anemometer RH Pen Uživatelský manuál stáhnout pdf (Strana 6)

Unit Selection

1. Turn on the meter by pressing the Power button.

2. Press the Unit button for at least 2 seconds and both the

upper and lower values will start to flash (see below).

Use the ▲ button to switch the upper display unit, and

use the  button to switch the lower display unit. Then

press the 

 

 button to accept the selected units.

%RH

60.9

25.9 ºC

Value Flashing

Measurement units:

Anemometer m/S, Km/h, FPM, mph, Knot

Temperature

ºC, ºF

Humidity %RH

Dew Point

ºC, ºF

The most recent settings are stored when the power is

turned off, and displayed again when power is turned back

on.

MEASURING PROCEDURE

Electrical Specifications

Anemometer (Air velocity)

Measure-

ment

Range Resolution Accuracy

m/S 0.4 to 30.0 m/

0.1 m/S

≤ 20m/S :

± 3% F.S.

> 20 m/S :

± 4% F.S

(all measurements)

Km/h 1.4 to 108.0

km/h

0.1 Km/h

FPM 80 to 5910 ft/

min

1 Ft/min

mph 0.9 to 67.0

mph

0.1 mph

Knots 0.8 to 58.3

knots

0.1 knots

SPECIFICATIONS

Temperature

Measuring Range 0 ºC to 50 ºC / 32 ºF to 122 ºF

Resolution 0.1 ºC / 0.1 ºF

Accuracy ±0.8 ºC / 1.5 ºF

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře

Sper-scientific 850021 Anemometer RH Pen Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Měřící nástroje Sper-scientific 850021 Anemometer RH Pen