Sper-scientific 850024 Hot Wire Anemometer SD Card Logger Uživatelský manuál stáhnout pdf (Strana 15)

MEASUREMENT PROCEDURES

When the probe

is not used, the

sensor cover

should be in the

up position.

Probe Handle

1. Press POWER to turn the meter on.

2. Plug the anemometer probe plug into the anemometer

probe input socket.

3. Press and hold FUNC to cycle through the options until

“An” appears on the LCD. Release the FUNC button.

4. Hold the probe handle and point the directional mark on

the probe head toward the air flow. The air velocity

value appears on the upper display and the air

temperature value appears on the lower display.

Note….

Do not use fingers or any tools to touch the air velocity

sensor, as it could damage the unit and void the warranty.

Point the white dot indicator on the probe head toward the

air flow.

Air velocity

sensor

Sensor

cover slides

down when

using the

probe.

Direction mark

Air Velocity and Air Temperature

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Žádné komentáře

Sper-scientific 850024 Hot Wire Anemometer SD Card Logger Uživatelský manuál Strana 15